Safety glasses

Jewelers saw and blades (#2/0-4/0)

Bench Block

Bench Pin

Pliers-flat nose, chain nose, round nose

Files – hand files and/or needle files

Calipers – digital calipers can be found online or at Harbor Freight for around $20

Rawhide mallet

Wire cutters

Scribe or marker

Flexshaft or other tool for drilling

1.0mm drill bit
20mm mandrel (dapping punch, dowel rod, etc.)
Ring mandrel
Exacto Knife or similar

Torch for silver soldering.
 A Word on Torches:
Detachable torch heads with disposable butane canisters will be sufficient for this course.   These should be Sterno (or comparable) heads paired with collared butane canisters that are NOT refillable.  Please note that small culinary torches like Blazers will not be efficient for the full scope of this project.  Dual fuel rigs and larger torches such as the Smith Silver Smith and Little Torch, and comparable systems, will work as well.

***Optional

Disc Cutter
Metal shears

miter vise/jig

Dimple pliers 

metal stamps

texture hammers

bezel rocker, burnishers or bezel pusher  if you are adding a stone to the project

 ball bur (any size)
cylinder bur (any size)

Supplies ***The dimensions of supplies here are what were used in the videos and slideshow. Other sizes will work, of course, but some adjustments will be necessary.

Watch Crystals - From Esslinger.com ***Note: the SKU's are the same but when you go to their website you can select the diameter. click here

Watch Crystal Flat Round Standard Mineral Glass Crystal 1mm Thick

SKU:201100

MM Size: 20.0mm 
SKU:201100

MM Size:21.0mm

Chain - if you want a pendant
Jump rings (2) 16g x 3.5mm inside diameter (or similar for attaching chain)   Rio Grande  Item #: 696290
Jump ring (1) 16g x 6mm i.d. (or similar for eye piece)  Rio Grande  Item #:  690624
2.03 mm thick wall tubing - Rio Grande  Item #: 100450
2mm square sterling silver wire approx. 6" (15cm) Rio Grande Item #: 100512
24g (0.5mm) sterling silver sheet as follows:
     76mm x 65mm (center tube)
     26mm x 69mm (eye piece)
     26mm x 26mm (or larger for eye piece top)
     12mm x 69mm (bottom compartment)
     12mm x 64mm (inner sleeve)
18g (1mm) sterling silver wire approx 6" (15cm)
Mylar sheet - Amazon
Transparent tape
Casting grain or make your own silver balls   
epoxy - (I like Starbond...https://starbond.com/ but any will do)
silver solder
flux
reflective objects such as pieces of glass, colored cz, transparent plastic etc. to put in the bottom compartment for viewing